Bench Vice
Material: Alloy steel screw and Ducalite iron nut
Type Of Vice: Bench Vice
Usage/Application: Industrial
Jaw Opening (Inch): 3 Inch, 4 Inch, 6 Inch, 8 Inch.
Base Type: Fixed
0 Reviews
C Clamp
₹3,000.00C-clamps are typically made of steel or cast iron though smaller clamps may be madeof At the top of the "C" is usually a small flat edge. At the bottom is a threaded hole through which a large threaded screw protrudes.When the clamp is actually used, it is very rare that this occurs. Generally some other object or objects will be contained between the top and bottom flat edges. C Clamp Set 4" 6" 8"
Weight: 5.8 Kg
0 Reviews
₹3,000.00
Chuck Guard For Lathe
₹1,499.00This protection shield is normally mounted on the cross-slide of the Lathe, although mounting to other parts of the machine is possible. The steel structure with a 4mm thick polycarbonate window allows protection from chips and coolant, along with visibility to the point of operation.- Better Safety - Prevents Operator from Metal Chips - Prevents Operator from Coolant Water - More Cleanness
Weight: 3 Kg
0 Reviews
₹1,499.00
Chuck Plate For Lathe
₹1,800.00- Mounts Chuck on a Spindle - LOO Type & A2-4 Type Available - Quick Release - Repeatability - Accurate Mounting - 20 GCI Grade Cast Iron. -Made in accordance with the well-defined quality standards of the industry, these Chuck Plate are widely demanded among patrons. We keep in mind the industry set quality standards while manufacturing these Chuck Plate.
Weight: 6 Kg
0 Reviews
₹1,800.00
Control Panel Board
₹7,500.00-A control panel is a flat, often vertical, area where control or monitoring instruments are displayed. They are found in factories to monitor and control machines or production lines and in places such as Older control panels are most often equipped with push buttons and analog instruments, whereas today in many are used for monitoring and control purposes. - Emergency STOP Button - Increased Production - Overload Protection - Inching System - Single Phase Preventer - Extra 2 Speed R/F Switch
0 Reviews
₹7,500.00
Coolant Pump Fittings - Reduces your expense and save your time
0 Reviews
Extra Third Shaft For Lathe
₹7,900.00- Recommended for Machines Lengthier than 1 mtr - Sudden Reverse/Forward/Stop - More Production - Operator Friendly The bevel box by which means the action of third-shaft control rod was made to pass through the bed and engage with the rear-mounted headstock clutch lever.
0 Reviews
₹7,900.00
Face Plate For Lathe
₹2,500.00It is capable of being with Delta and Jet lathes just to mention a few and is idea for small to medium sized turning projects. like Better grip for Random shapes, Mounts Job with True face,Weight : 10Kg etc...LOO Type & A2 type Both Available GCI 20 High-Grade Cast Iron
Weight: 10 Kg
0 Reviews
₹2,500.00
Feeler Gauge
₹249.00- A feeler gauge is made up of a series of steel plates or blades which have a progression of very precisely calibrated thicknesses often joined at one end with a pin or rivet and which fold back like a fan into a handle.
- Each blade is marked with its thickness.
- A feeler gauge is used to measure or set very small gaps, normally under 1 mm.
- When the blades are folded back into the handle, the thin, delicate blade is protected.
- The thickest possible blade that can be inserted into a gap or crack shows its width.
Weight: 0.074 Kg
0 Reviews
₹249.00
Follow Rest For Lathe
- Improves Accuracy for Lengthy Job - Prevents Tool Thirst Variations - Bearings Available On Pin Tip - Follows the carriage - Essential for Shaft Turning -The upper jaw prevents the work from climbing the cutting tool, The lower jaw prevents the work from springing away from the cutting tool The follower rest jaws are adjusted in the same manner as steady rest jaws. The follower rest is often used when long, flexible shafts are threaded, as shown in Figure 3-108, At the completion of each threading cut, remove any burrs that may have formed to prevent them from causing the work to move out of alignment.
Weight: 6 Kg
0 Reviews
Key Way Attachment On Lathe
- It's also useful to make a hole in the long shaft.
- Holds Any Shape JOB - End-mill Cutter gripped with Spindle.
- Keyway attachment with motor works with the movement of Cross Slider.
- Grooving Operation.
0 Reviews
Key Way Jaw For Lathe
Key Way Jaw Usage:-
- First, hold a job in this jaw than an end mill cutter which is griped into spindle makes a key way by moving of cross slide.
- Can do the-the key ways in workpieces.
- It's also useful to make holes in workpieces.
- Holds Any Shape JOB - end mill Cutter gripped with Spindle.
- Keyway Made with the movement of Cross Slider.
- Grooving Operation.
0 Reviews
Lathe Carriage Stopper For Turning
6 Station Carriage Stopper For Lathe Machine
Free With BANKA Lathe Machine
Save Time And Money
Low-Cost Lathe Accessories
Turner Likes Very Much
0 Reviews
Lathe CNC Cutting Tools - 1 Pcs.
- Carbide tip tools.
- Grooving tool.
- Cut-Off blade.
- Parting blades.
- Boring bar.
- Side tool.
0 Reviews
Lathe Cutting Tools - 1 Pcs.
- Carbide tip tools.
- Grooving tool.
- Cut-Off blade.
- Parting blades.
- Boring bar.
- Side tool.
- Tip Size marking
- Casting & Steel Marking
- Die Forging
- 4 x More Cutting
- Buy Any 3 of Above & Get Delivery Free
0 Reviews
Lathe Dog Carriers Straight & Bend
₹1,800.00- For Lengthy Jobs - Essential for Shaft Turning - Between center job - Cylindrical grinding operation -A carrier is most often used when turning between centers on a lathe. but it may be used on dividing heads or any similar situation. It is used in conjunction with a drive plate and drives pins: the plate is mounted directly on the machine spindle (as with a chuck) and the drive pin is attached to the plate. In use the carrier and workpiece are inserted between centers and the leg of the carrier rests against the drive pin.
Weight: 1 Kg
0 Reviews
₹1,800.00
Lathe Dog Chuck
- Lathe with an independent-jaw chuck, each jaw can be moved independently.
- Because they most often have four jaws, the term four-jaw chuck without other qualifications is understood by machinists to mean a chuck with four independent jaws.
- The independence of the jaws makes these chucks ideal for (a) gripping non-circular cross sections and (b) gripping circular cross-sections with extreme precision (when the last few hundredths of a millimeter [or thousandths of an inch] of runout must be manually eliminated).
Weight: 16 Kg
0 Reviews
Lathe Knurling Tools
This tool is mainly suitable for producing RAA straight knurling profiles.Serration between tool holder and cut knurling head provides extra rigidity and reduced wear on the knurling wheels. 5/16" x 3/4" Shank, 6 Head Knurling Tool Holdersix head. This knurling tool holder features robust construction with six hardened and precision ground wheels; fine, medium and coarse knurls for forming diamond patterns. It also has a lock knob, used to secure the head and wheels in position.
0 Reviews
Lathe Pipe Center
- It's used for the center in the bore of a pipe
- Securely supports the working job
- Material like Thin-walled
- Size: MT-3 MT-4,MT-5
- Weight: 2 Kg. (Approx).
0 Reviews
Lathe Quick Change Tool Post With 3 Holder
- Made from Ductile Cast Iron
- Changes tool real quickly
- Several Operations Simultaneously
- 0.02mm Accuracy while Re-Positioning
-The specifications list provides details about each quick change tool post set.
BANKA Tool technology also carries an extensive line of cutting tools for both conventional and CNC applications. this includes cut off and blades, knurls, HSS and carbide threading tools, chip breakers, and a full line of carbide to be used with BANKA tooling
0 Reviews
Lathe Revolving Center
MT-3 Price - 1900 Rs.
MT-4 Price - 2300 Rs.
MT-5 Price - 4300 Rs.
- For Lengthy Jobs
- Speedy & effective work
- International standard
- 3 Bearing For No Vibration
- Optimum output
- Quality tested
- Weight: 2 Kg
0 Reviews
Lathe Square Tool Post
- The single tool post consists of a circular body 1 with a collar at one end and a threaded hole at the other.
- A vertical slot is provided in the body to accommodate the tool/tool holder.
- The body is slid through the square block 5, which is finally located in the T-slot, provided in the compound rest.
- The design permits rotation of the body about the vertical axis.
- Holds 3 Tool - Fits on Top Slider - Turning & Bore operation.
Weight: 7 Kg
0 Reviews
Lathe True Chuck
- Self Centring 3 JAW Chuck
- Piece to Piece Replacement Guarantee
- Smooth Operation
- Best for ROUND TYPE job
- No vibration till 2000 RPM
- Best for ROUND TYPE job
- Superior GRIP
Weight: 11 Kg
0 Reviews
Lathe Vibration Support - 4 Pcs. Set
₹3,500.00- Lathe Vibration support is essential while turning an eccentric job.
- It was made from a Cast Iron Material and fitted on a Machine base.
- Must buy 4 piece lathe vibration support to improve your production speed.
- Buy lathe vibration support to reduce your production cycle.
0 Reviews
₹3,500.00