Categories: Accessories for Lathe machines, Machine Shop Accessories, Tools & Instruments, Radial Drill Machines
Tilting Table For Radial Drill Machine
- Use For Redial Drill Machine
- 0 - 60 Degree Range (Both Side).
- Height: 300 mm
- Working: 500mm x 450mm
- Manufactured from High-Grade Casting.
- Number of T-slot : 3
- Approx Weight : 200 kg.
0 Reviews
Screw Driver Set
- Type: Combination
- Tip Type: Polydrive, Phillips, Line
- Usage: Household
- Product Type: Screwdriver Set
0 Reviews
Steady Rest For Lathe
- Makes Lengthy Job 'Steady' - Prevents unwanted movement of job - Bearings Available On Pin Tip. To setup the rest, first machine and polish the portion of the work that is to be used as the bearing surface. Clean the portion of the ways where the steady rest is to be mounted, place the steady rest on the ways and clamp loosely. Open the top of the steady rest and place the workpiece in the chuck with the bearing surface over the adjustable jaws. Clamp the steady rest securely to the ways. Close the top of the steady rest and adjust the jaws to the workpiece.
Weight: 10 Kg
0 Reviews
Categories: Accessories for Drilling machines, Accessories for Lathe machines, Accessories for Milling machines, Machine Shop Accessories, Tools & Instruments
Tool Bag With Tools
- COMFORTABLE TO CARRY:
- Padded Free carrying handles.
- Adjustable straps and large pads for extra comfort.
- Stitching Made with 600D.
- Polyester for maximum durability.
- Rubber foam bottom keeps the bag sturdy.
- Protects contents from hard falls.
0 Reviews
ARC-200S 1-PHASE - Portable Stud Type ARC Welding Machine
- Types: Stud
- 200AMP
- Superb Performance
- Sturdy Structure
- Rust-free Body
- Portable Type
- Easy Handle
- Easy Operate
- Free Delivery
0 Reviews
Categories: Accessories for Drilling machines, Accessories for Milling machines, Machine Shop Accessories, Tools & Instruments
End Mill Cutter Set
- Universal Milling Machine End Mill Cutter -
- Price Per one Piece (The price shown above is of the smallest size, size wise price should be asked from the customer executive)
- 5 To 12 MM
- Regular Length Most commonly used for a variety of milling applications.
- Stub Length Provides maximum rigidity and reduces deflection.
- Colour - Silver
0 Reviews
ER Collects ER 16 To ER 40
- Milling Collects Set
- Used in Universal Milling Machine / Vertical milling Machine
- DIN 6499 & ISO 15488 Standards
- Colour - Silver
0 Reviews
Milling - Collet Adapter For E Type
- Morse Taper Collect Adoptor E
- Made from 16mnCr5, case hardened to 55-58 HRC.
- Precision ground to an accuracy of 0.15 mm TIR.
- ISO-30 M-12 E40 to ISO-50 M-24 E40
- Colour - Silver
0 Reviews
Milling Drilling MT-4 Collect Adopter E Type Collect
- Morse Taper Collect Adoptor E
- Made from 16mnCr5, case hardened to 55-58 HRC.
- Precision ground to an accuracy of 0.15 mm TIR.
- Quality spring steel EN-47
- MT-2 M-10 (Draw Bolt Type) E-40 /MT-6 (Tang Type With Cotter Slot) E-45
- Colour - Silver
0 Reviews
Drill Chuck Arbor
- Milling & Drill Chuck Arbour
- Made from 16mnCr5, case hardened to 55-58 HRC.
- As per IS - 9097 (i) – 1979
- Precision ground run out 0.015 mm max.
- ISO : 30 JT-6 To  ISO : 40 JT-3
- Colour - Silver
0 Reviews
Milling - Universal Vice
- Milling Vice
- Use of universal Milling & Vertical Milling Machin
- Size: 100 to 150 mm
- Universal vice laws the Work Piece to be set at any desired compound angle
- Colour - Blue
0 Reviews
High Speed Steel Drill Bit Sets 1 MM To 13 MM
High-Speed Steel Drill Bit Sets MM-Bit is constructed high-speed steel for the best combination of strength, heat resistance, and wear resistance Standard 118-degree point for use in wood, metal.
25 bit set 1 mm to 13 mm. Weight: 0.8 Kg
0 Reviews
Milling-Rotary Table 150 MM- 6 INCH
- Rotary Table Size 4,6, 8, 10, 12 Inch
- Use of Slotting Machine / Milling Machine
- Adjustable moving
- T-Slots mounted on the graduated base.
- Colour - Green/Blue/Gray
0 Reviews
Spirit Level
Sprit levels never go a-miss as they are for any use. In a range of different sizes measure up and do the job properly aligning the bubble level to the center. Comes with rubber ends to reduce the risk of scratching or damage. Weight: 0.234 Kg
0 Reviews
Lathe Knurling Tools
This tool is mainly suitable for producing RAA straight knurling profiles.Serration between tool holder and cut knurling head provides extra rigidity and reduced wear on the knurling wheels. 5/16" x 3/4" Shank, 6 Head Knurling Tool Holdersix head. This knurling tool holder features robust construction with six hardened and precision ground wheels; fine, medium and coarse knurls for forming diamond patterns. It also has a lock knob, used to secure the head and wheels in position.
0 Reviews
Reverse Forward Switch With 2 Meter Wiring
Forward Reverse 3 Phase Switch is manufactured by using the best quality raw materials so these products are free from any abrasion. In addition to this, these reverse forward switches are made available at very reasonable rates against the market. - START / STOP / Reverse - Cost-Effective Product - Compatible in LATHE, DRILL, MILLING, SHAPING, etc...
Weight: 1 Kg
0 Reviews
Try Square Set
The simplest method of checking a low grade square for accuracy is to draw a line across a board with a flat face and straight edge. Then flip the square over 180 degrees and check if the blade aligns with the line just drawn. Any error is multiplied by two and appears as a wedge or taper In the example seen opposite, the try-square is used to test that a 90 degree angle exists across the edge of the steel. Although a burr exists on the edge of the steel it fits into the slot and does not affect the way the try-square is used. Weight: 0.81 Kg
0 Reviews
Curved Jaw Locking Plier
₹699.00Curved jaw puts tremendous pressure on four points of any style nut or bolt head, making it perfect for any application that requires maximum torque. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Hardened teeth are designed to grip from any angle.
Weight: 0.55 Kg
0 Reviews
₹699.00
High Speed Steel Drill Bit Sets Inch And MM
₹4,499.00- Drill bits Set
- Use of Radial Drill & Pillar Drill
- Standard 118-degree point for use in wood, metal, and plastic 29-bit set
- 1/16 Inch to 31/64 Inch
- Colour - Light Silver
0 Reviews
₹4,499.00
Splash Guard For Lathe
₹6,500.00- Stores Waste - Improves cleanness - Essential when more than one machine installed - Protects Operator from Metal Chips & Coolant ater - Better Safety While Operation.The only problem is the small step the covers the motor. As you can see from the photo, it tends to kick up a bit, which makes the gap between it and the saddle very small. But I think a bit of pounding with the mallet should straighten that out - in a week or so, when the paint sets a bit more. Then the simple process of welding in the new pieces. That has been done, sort of. It is so warped it is not funny. It still needs to be sanded then painted. If it looks acceptable I may post pictures.
Weight: 17 Kg
0 Reviews
₹6,500.00
Categories: Accessories for Drilling machines, Accessories for Milling machines, Machine Shop Accessories, Tools & Instruments
Tap & Die Set
₹2,500.00- Includes Taper, Intermediate and plug taps and a die for each size.
- In metal working, the use of a tap lubricant is essential to achieve cleanly formed threads and to minimize friction or breakages. - Also includes 195mm tap wrench, 205mm die wrench, screwdriver and Metric thread gauge.
- Dies: - M3 x 0.5 - M4 x 0.7 - M5 x 0.8 - M6 x 1.0 - M7 x 1.0 - M8 x 1.25 - M10 x 1.5 - M12 x 1.75
- Taps: - M3 x 0.5 Second , M4 x 0.7 Second,M5 x 0.8 Second, M6 x 1.0 Second,M7 x1.0 Second, M8 x 1.25 Second , M10 x 1.5 , M12 x 1.75 Second
- Tools centre is the authorised distributor for this product so kindly beware of duplicacy
0 Reviews
₹2,500.00
Screw Pitch Gauge (Metric 60')
₹499.00-Our Screw Pitch Gauges are very handy tool for gauging threads. We make our Screw Pitch Gauge available at very economical price. -Measuring thread and external thread tooth pitch. -The Screw Pitch Gauge provided by us is made up of high quality tool Steel and is appreciated for its efficiency and high performance.
Weight: 0.081 Kg
0 Reviews
₹499.00
Categories: Machine Shop Accessories, Tools & Instruments
Rear Tool Post
₹3,500.00- More Production - Several Operations - Simultaneously -It is fabricated from standard mild steel sections and fixed to the boring table by two bolts placed immediately below the cutting tool. The action of tightening the clamping handle locks the attachment to the body using a long T-bolt which passes through the centre of the base column, and is thus also locked to the boring table.
Weight: 5 Kg
0 Reviews
₹3,500.00
Steady Rest For Heavy Duty Lathe Machine
₹8,500.00Makes Lengthy Job 'Steady - Prevents unwanted movement of job - Bearings Available On Pin Tip. To setup the rest, first machine and polish the portion of the work that is to be used as the bearing surface. Clean the portion of the ways where the steady rest is to be mounted, place the steady rest on the ways and clamp loosely. Open the top of the steady rest and place the workpiece in the chuck with the bearing surface over the adjustable jaws. Clamp the steady rest securely to the ways. Close the top of the steady rest and adjust the jaws to the workpiece.
Weight: 51 Kg
0 Reviews
₹8,500.00