Reverse Forward Switch With 2 Meter Wiring
Revolving Center CNC Extended Point (Heavy Duty)
Screw Driver Set
- Type: Combination
- Tip Type: Polydrive, Phillips, Line
- Usage: Household
- Product Type: Screwdriver Set
Screw Pitch Gauge (Metric 60')
₹499.00SLOTTING CUTTING TOOL
₹800.00Spirit Level
Sprit levels never go a-miss as they are for any use. In a range of different sizes measure up and do the job properly aligning the bubble level to the center. Comes with rubber ends to reduce the risk of scratching or damage. Weight: 0.234 Kg
Splash Guard For Lathe
₹6,500.00Split Sleeve (Taps)
₹700.00Steady Rest For Heavy Duty Lathe Machine
₹8,500.00Steady Rest For Lathe
Tailstock Revolving Chuck
₹13,500.00Tap & Die Set
₹2,500.00- Includes Taper, Intermediate and plug taps and a die for each size.
- In metal working, the use of a tap lubricant is essential to achieve cleanly formed threads and to minimize friction or breakages. - Also includes 195mm tap wrench, 205mm die wrench, screwdriver and Metric thread gauge.
- Dies: - M3 x 0.5 - M4 x 0.7 - M5 x 0.8 - M6 x 1.0 - M7 x 1.0 - M8 x 1.25 - M10 x 1.5 - M12 x 1.75
- Taps: - M3 x 0.5 Second , M4 x 0.7 Second,M5 x 0.8 Second, M6 x 1.0 Second,M7 x1.0 Second, M8 x 1.25 Second , M10 x 1.5 , M12 x 1.75 Second
- Tools centre is the authorised distributor for this product so kindly beware of duplicacy
Taper Turning Attachment For Lathe Machine
- Tapers are classified by American Standards Association as self-holding tapers and steep or self-releasing tapers.
- Self-holding has been applied to the smaller tapers-like Morse and the Brown & Sharpe- because, where the angle of the taper is only 2 or 3 degrees.
- The shank of a tool is so firmly seated in its socket that there is considerable frictional resistance to any force tending to turn or rotate the tool relative to the socket.
- The term “self–holding” is used to distinguish relatively small tapers from the larger or self-releasing tapers.
Tilting Table For Radial Drill Machine
- Use For Redial Drill Machine
- 0 - 60 Degree Range (Both Side).
- Height: 300 mm
- Working: 500mm x 450mm
- Manufactured from High-Grade Casting.
- Number of T-slot : 3
- Approx Weight : 200 kg.
Tool Post Grinding For Lathe Machine
Tools Tray For Lathe And Milling
Try Square Set
The simplest method of checking a low grade square for accuracy is to draw a line across a board with a flat face and straight edge. Then flip the square over 180 degrees and check if the blade aligns with the line just drawn. Any error is multiplied by two and appears as a wedge or taper In the example seen opposite, the try-square is used to test that a 90 degree angle exists across the edge of the steel. Although a burr exists on the edge of the steel it fits into the slot and does not affect the way the try-square is used. Weight: 0.81 Kg