Lathe Knurling Tools

Original price was: ₹650.00.Current price is: ₹500.00.

This tool is mainly suitable for producing RAA straight knurling profiles.Serration between tool holder and cut knurling head provides extra rigidity and reduced wear on the knurling wheels. 5/16" x 3/4" Shank, 6 Head Knurling Tool Holdersix head. This knurling tool holder features robust construction with six hardened and precision ground wheels; fine, medium and coarse knurls for forming diamond patterns. It also has a lock knob, used to secure the head and wheels in position.

0 Reviews
Original price was: ₹650.00.Current price is: ₹500.00.

Reverse Forward Switch With 2 Meter Wiring

Original price was: ₹950.00.Current price is: ₹750.00.
Forward Reverse 3 Phase Switch is manufactured by using the best quality raw materials so these products are free from any abrasion. In addition to this, these reverse forward switches are made available at very reasonable rates against the market. - START / STOP / Reverse - Cost-Effective Product - Compatible in LATHE, DRILL, MILLING, SHAPING, etc...
Weight: 1 Kg
0 Reviews
Original price was: ₹950.00.Current price is: ₹750.00.

Try Square Set

Original price was: ₹2,300.00.Current price is: ₹2,000.00.

The simplest method of checking a low grade square for accuracy is to draw a line across a board with a flat face and straight edge. Then flip the square over 180 degrees and check if the blade aligns with the line just drawn. Any error is multiplied by two and appears as a wedge or taper In the example seen opposite, the try-square is used to test that a 90 degree angle exists across the edge of the steel. Although a burr exists on the edge of the steel it fits into the slot and does not affect the way the try-square is used. Weight: 0.81 Kg

0 Reviews
Original price was: ₹2,300.00.Current price is: ₹2,000.00.

Curved Jaw Locking Plier

699.00
Curved jaw puts tremendous pressure on four points of any style nut or bolt head, making it perfect for any application that requires maximum torque. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Hardened teeth are designed to grip from any angle.
Weight: 0.55 Kg
0 Reviews
699.00

High Speed Steel Drill Bit Sets Inch And MM

4,499.00
  • Drill bits Set
  • Use of Radial Drill & Pillar Drill
  • Standard 118-degree point for use in wood, metal, and plastic 29-bit set
  • 1/16 Inch to 31/64 Inch
  • Colour - Light Silver
0 Reviews
4,499.00

Splash Guard For Lathe

6,500.00
- Stores Waste - Improves cleanness - Essential when more than one machine installed - Protects Operator from Metal Chips & Coolant ater - Better Safety While Operation.The only problem is the small step the covers the motor. As you can see from the photo, it tends to kick up a bit, which makes the gap between it and the saddle very small. But I think a bit of pounding with the mallet should straighten that out - in a week or so, when the paint sets a bit more. Then the simple process of welding in the new pieces. That has been done, sort of. It is so warped it is not funny. It still needs to be sanded then painted. If it looks acceptable I may post pictures.
Weight: 17 Kg
0 Reviews
6,500.00

Tap & Die Set

2,500.00
  • Includes Taper, Intermediate and plug taps and a die for each size.
  • In metal working, the use of a tap lubricant is essential to achieve cleanly formed threads and to minimize friction or breakages. - Also includes 195mm tap wrench, 205mm die wrench, screwdriver and Metric thread gauge.
  • Dies: - M3 x 0.5 - M4 x 0.7 - M5 x 0.8 - M6 x 1.0 - M7 x 1.0 - M8 x 1.25 - M10 x 1.5 - M12 x 1.75
  • Taps: - M3 x 0.5 Second , M4 x 0.7 Second,M5 x 0.8 Second, M6 x 1.0 Second,M7 x1.0 Second, M8 x 1.25 Second , M10 x 1.5 , M12 x 1.75 Second
  • Tools centre is the authorised distributor for this product so kindly beware of duplicacy
0 Reviews
2,500.00

Screw Pitch Gauge (Metric 60')

499.00
-Our Screw Pitch Gauges are very handy tool for gauging threads. We make our Screw Pitch Gauge available at very economical price. -Measuring thread and external thread tooth pitch. -The Screw Pitch Gauge provided by us is made up of high quality tool Steel and is appreciated for its efficiency and high performance.
Weight: 0.081 Kg
0 Reviews
499.00

Rear Tool Post

3,500.00
- More Production - Several Operations - Simultaneously -It is fabricated from standard mild steel sections and fixed to the boring table by two bolts placed immediately below the cutting tool. The action of tightening the clamping handle locks the attachment to the body using a long T-bolt which passes through the centre of the base column, and is thus also locked to the boring table.
Weight: 5 Kg
0 Reviews
3,500.00

Steady Rest For Heavy Duty Lathe Machine

8,500.00
Makes Lengthy Job 'Steady - Prevents unwanted movement of job - Bearings Available On Pin Tip. To setup the rest, first machine and polish the portion of the work that is to be used as the bearing surface. Clean the portion of the ways where the steady rest is to be mounted, place the steady rest on the ways and clamp loosely. Open the top of the steady rest and place the workpiece in the chuck with the bearing surface over the adjustable jaws. Clamp the steady rest securely to the ways. Close the top of the steady rest and adjust the jaws to the workpiece.
Weight: 51 Kg
0 Reviews
8,500.00

Letter Punch Set (Alphabets)

1,999.00
Manufactured by making use of quality approved carbon steel and innovative technology under the strict vigilance of our diligent professionals, the punch set provided by is highly preferable for the installation in various punching machines.his Letter Punch Set in different specifications at rock bottom prices within the estimated time span
Weight: 1.64 Kg
0 Reviews
1,999.00

Extra Third Shaft For Lathe

7,900.00

- Recommended for Machines Lengthier than 1 mtr - Sudden Reverse/Forward/Stop - More Production - Operator Friendly The bevel box by which means the action of third-shaft control rod was made to pass through the bed and engage with the rear-mounted headstock clutch lever.

0 Reviews
7,900.00

Magnetic Stand With Dial Gauge

3,900.00
UNBRAND SIZE:0.1mm Weight : 1kg (Approx).
Weight: 1 Kg
0 Reviews
3,900.00

Micrometer -Two Peace Set: 0 To 25mm / 25 To 50mm

2,800.00

UNBRAND TWO PEACE SET: RANGE : 0 TO 25mm / 25 TO 50mm WEIGHT - 450 APPROX USE : The spindle is a very accurately machined screw and the object to be measured is placed between the spindle and the anvil. The spindle is moved by turning the ratchet knob or thimble until the object to be measured is lightly touched by both the spindle and the anvil.Micrometers are also used in telescopes or microscopes to measure the apparent diameter of celestial bodies or microscopic objects.

0 Reviews
2,800.00

Drill Bit Stand MM

Original price was: ₹249.00.Current price is: ₹199.00.

-Stand holds 25 drill bits in inch sizes 1 mm to13 mm -Increments and has mounting holes for hanging on a wall -Labeled storage holes for identification and organization -Made of steel for durability Weight: 0.055 Kg

0 Reviews
Original price was: ₹249.00.Current price is: ₹199.00.

Figure Punch Set

700.00

Figure Punch Set that is available with 27 sticks. Manufactured by making use of quality approved carbon steel and innovative technology under the strict vigilance of our diligent professionals, the punch set provided is highly preferable for the installation in various punching machines.his Figure Punch Set in different specifications at rock bottom prices within the estimated time span. Weight: 0.552 Kg

0 Reviews
700.00

Chuck Guard For Lathe

1,499.00
This protection shield is normally mounted on the cross-slide of the Lathe, although mounting to other parts of the machine is possible. The steel structure with a 4mm thick polycarbonate window allows protection from chips and coolant, along with visibility to the point of operation.- Better Safety - Prevents Operator from Metal Chips - Prevents Operator from Coolant Water - More Cleanness
Weight: 3 Kg
0 Reviews
1,499.00

Lathe Dog Carriers Straight & Bend

1,800.00
- For Lengthy Jobs - Essential for Shaft Turning - Between center job - Cylindrical grinding operation -A carrier is most often used when turning between centers on a lathe. but it may be used on dividing heads or any similar situation. It is used in conjunction with a drive plate and drives pins: the plate is mounted directly on the machine spindle (as with a chuck) and the drive pin is attached to the plate. In use the carrier and workpiece are inserted between centers and the leg of the carrier rests against the drive pin.
Weight: 1 Kg
0 Reviews
1,800.00

Milling Reduction Socket

1,599.00
  • Milling Machine Reduction Socket
  • ISO:30 Tyre – A To ISO : 50 Tyre – A
  • Used in  Universal Milling Machine / Vertical milling Machine / Drilling Cum Milling
  • ISO 40 Standard
  • Colour - Silver
0 Reviews
1,599.00

Centre Drill Bit

1,500.00

Center Drill bit for drilling components that require machining between centers. Has a 120 & deg point angle with a 60 ° included countersink.

0 Reviews
1,500.00

Feeler Gauge

249.00
  • A feeler gauge is made up of a series of steel plates or blades which have a progression of very precisely calibrated thicknesses often joined at one end with a pin or rivet and which fold back like a fan into a handle.
  • Each blade is marked with its thickness.
  • A feeler gauge is used to measure or set very small gaps, normally under 1 mm.
  • When the blades are folded back into the handle, the thin, delicate blade is protected.
  • The thickest possible blade that can be inserted into a gap or crack shows its width.
Weight: 0.074 Kg
0 Reviews
249.00

Face Plate For Lathe

2,500.00
It is capable of being with Delta and Jet lathes just to mention a few and is idea for small to medium sized turning projects. like Better grip for Random shapes, Mounts Job with True face,Weight : 10Kg etc...LOO Type & A2 type Both Available GCI 20 High-Grade Cast Iron
Weight: 10 Kg
0 Reviews
2,500.00

C Clamp

3,000.00
C-clamps are typically made of steel or cast iron though smaller clamps may be madeof At the top of the "C" is usually a small flat edge. At the bottom is a threaded hole through which a large threaded screw protrudes.When the clamp is actually used, it is very rare that this occurs. Generally some other object or objects will be contained between the top and bottom flat edges. C Clamp Set 4" 6" 8"
Weight: 5.8 Kg
0 Reviews
3,000.00

Control Panel Board

7,500.00

-A control panel is a flat, often vertical, area where control or monitoring instruments are displayed. They are found in factories to monitor and control machines or production lines and in places such as Older control panels are most often equipped with push buttons and analog instruments, whereas today in many are used for monitoring and control purposes. - Emergency STOP Button - Increased Production - Overload Protection - Inching System - Single Phase Preventer - Extra 2 Speed R/F Switch

0 Reviews
7,500.00
Back to Top

Search For Products

Product has been added to your cart