-
×
Pillar Drill Machine 19 MM
₹34,000.00 -
×
DCM 19 mm- Drilling Cum Milling Combo – Drilling Capacity 19 mm
₹59,500.00
Separate us from others
- 72 mm Dia. Alloy Steel Ram with Heavy spindle of MT-3 and 30206 Tapper Roller Bearings on both sides.
- 27 mm Dia. Pinion of EN-8
- 10 DP heavy Teeth on Pinion and RAM both.
- Gears made up of 30 Grade Cast Iron having ductile property ensuring long life against wear-out.
- Backgear supported on Thrust Bearing withstanding heavy downside load when drilling in gear drive.
- Spindle taper is internally ground to Close Tolerance ensuring maximum accuracy.
- Lifting Assembly with shaft of worm supported on bearings and neither on the bushes nor directly.
- Lifting Screw Supported on taper roller bearing ensuring longest life of worm and gears.
Helps you to find your goal
| Technical Specification | |
| Â Drilling Capacity | Â 19 mm |
| Â Column Dia | Â 74 |
| Â Spindle Nos to Table Dist | Â 670 |
| Â Spindle Nose to Base Dist | Â 930 |
| Â Spindle Center to Pillar face | Â 185 |
| Â Table Travel | Â 670 |
| Â Spindle Hole Taper | Â MT-2 |
| Â Spindle Speeds (RPM* Steps) | Â 86-3360*8 |
| Â Base Size Machine Area | Â 225 x 270 |
| Â Overall Base Size | Â 290 x 460 |
| Â Spindle Travel | Â 150 |
| Â Column Length | Â 1200 |
| Â overall Height with fully | Â 1510 |
| Â V-belt Section Size | Â A-43 |
| Â Weight ( Approx) | Â 160 kG |
| Â Motor | Â 1 H.p |
| Â Spindle Dia | Â 54 |
Milling Detail
Cross Travel :Â 275 mm
Longtidunel Travel :Â 150 mm
Table Size :Â 160 x 500 mm
Description
Drilling Cum Milling Machine 19mm
- Drilling Capacity: 19 mm
- Spindle Nose: MT2
- Max. Spindle Travel (Drilling Depth): 150 mm
- Spindle Speed: 86-3360 RPM
- Spindle to base distance: 930 mm
- Distance from column to spindle: 185 mm
- Cross Slide travel : 500 x 160 mm
- Motor: 1HP
Features
- 72 mm Dia. Alloy Steel Ram with Heavy spindle of MT-3 and 30206 Tapper Roller Bearings on both sides.
- 27 mm Dia. Pinion of EN-8
- 10 DP heavy Teeth on Pinion and RAM both.
- Gears are made up of 30 Grade Cast Iron having ductile property ensuring long life against wear-out.
- Back gear supported on Thrust Bearing withstanding heavy downside load when drilling in gear drive.
- Spindle taper is internally ground to Close Tolerance ensuring maximum accuracy.
- Lifting Assembly with a shaft of worm supported on bearings and neither on the bushes nor directly.
- Lifting Screw Supported on taper roller bearing ensuring the longest life of worm and gears.
Related products
-14%
-6%
