Pillar Drill Machine 19 MM
₹34,000.00
Separate us from others
Essential Features :
 |
 |
 |
|---|---|---|
| Gear Hardeness 45 HRC | 350 Nm Spindle Torch | 86-3360 RPM |
 |
|
 |
| 2 Amp At Maximum Load | Noise Level – 85 dB. | Accuracy – As per IS Standard |
Helps you to find your goal
| Technical Specification | |
| Drilling Capacity | 19mm |
| Column Dia | 74 |
| Spindle Nos. To table Dist. | 670 |
| Spindle Nose to Best Dist | 930 |
| Spindle Center To Pillar Face | 185 |
| Table Travel | 670 |
| Spindle Hole Taper | MT-2 |
| Spindle Speeds (RPM * Steps) | 86-3360*8 |
| Table Size | 300 mm |
| Base Size Machine Area | 225 x 270 |
| Overall Base size | 290 x 460 |
| Spindle Travel | 150 |
| Column Lenth | 1200 |
| Overall Hight with Fully | 1510 |
| V-Belt Section ( Size) | A-43 |
| Weight ( Approx) | 90 kg |
| Motor | 1 H.P |
| Spindle Dia | 54 mm |
Innovation with a Purpose
Quality
We maintain our drills quality by 4 stage inspection. as manufacturing process goes ahead each stage our inspector check all parameters. Though our metal drilling drill performance and accuracy are better than other industrial drill machine manufacturer. BANKA Pillar drills have auto feed drilling system with high-speed motor. We had fitted 2 Speed Motor in our drill, it runs from 40 – 2000 RPM spindle speed.
Our toolroom drill is manufactured as per Indian Standard Test by testing instruments like,
Straight Edge Meter:
A straightedge is a tool with an edge free-form curves or straight, used for transcribing straight lines. Straightedges are used in the automotive service and machining industry to check the flatness of machined mating surfaces of base as well as the drill arm. it should not be concave and convex.
True straightness can in some cases be checked by using a laser line level as an optical straightedge: it can illuminate an accurately straight line on a flat surface such as the edge of a plank or shelf. It effects in the production schedule, time schedule, time saving and increase the quality of our products.
Sound Level Decibel Meter:
As per the IS test our Tool drill head sound is measured by Decibel Meter and it should be up to 85 to 90 lbs. In every Drill Machine, it should be 85 lbs and our each Drill Machine noise level is under 85 lbs.
Dial Indicator Micrometers:
Dial Indicator Micrometers is used for precise measurement of components which are done on the Drill. It’s also used to measure the apparent diameter of celestial bodies or microscopic objects and used to check test the runout of the internal taper of spindle. As per IS Test each drill machine spindle internal taper near the spindle nose should be 0.02 mm and up to end of the spindle should be 0.03 mm.
Amperemeter:
It is used to measures the current in a circuit is to break the circuit open and insert an “ammeter” in line with the circuit so that all electrons flowing through the circuit also have to go through the meter. When an ammeter is placed in series with a circuit, it ideally drops no. voltage as current goes through Drill machine main motor.
BANKA is most popular for its quality and uniqueness of our services towards their customers. Our service engineers are highly trained and skilled to design BANKA products and to serve timely services. BANKA 38 Pillar Drill is generally designed low maintenance, time saving, suitable for reckless operation and heavy metal removal.
Our Deep Drilling machine is designed for drilling medium and large parts, as well as boring, counter boring, reaming, tapping and surfacing to done with different parts and different angles. Its arm is made from solid material casting and hardened & ground. We are using the gears hardened & ground for smooth running. All control levers are quick to operate and are properly guarded against accident.
Each machine is properly checked as per IS Test Chart by our experienced engineers through testing and inspection process before dispatch from our factory. We are also using the material as Indian Standard which is used while manufacturing.
Description
Pillar Drill Machine 19mm
- Drilling Capacity: 19 mm
- Column Dia: 74 mm
- Spindle Hole Taper: MT-2
- Spindle Speeds: 86-3360 RPM
- Spindle Nos. To table Dist. : 670 mm
- Spindle Center To Pillar: 185 mm
- Table Size: 300 mm
- Motor: 1 HP
Description
Quality
We maintain our drill’s quality by 4 stage inspection. as the manufacturing process goes ahead at each stage our inspector checks all parameters. Though our metal drilling drill performance and accuracy are better than other industrial drill machine manufacturers. BANKA Pillar drills have an auto-feed drilling system with a high-speed motor. We had fitted 2 Speed Motor in our drill, it runs from 40 – 2000 RPM spindle speed.
Our toolroom drill is manufactured as per Indian Standard Test by testing instruments like,
Straight Edge Meter:
A straightedge is a tool with an edge free-form curves or straight, used for transcribing straight lines. Straightedges are used in the automotive service and machining industry to check the flatness of machined mating surfaces of the base as well as the drill arm. it should not be concave and convex.
True straightness can in some cases be checked by using a laser line level as an optical straightedge: it can illuminate an accurately straight line on a flat surface such as the edge of a plank or shelf. It affects the production schedule, time schedule, time-saving, and increases the quality of our products.
Sound Level Decibel Meter:
As per the IS test, our Tool drill head sound is measured by Decibel Meter and it should be up to 85 to 90 lbs. In every Drill Machine, it should be 85 lbs and each Drill Machine’s noise level is under 85 lbs.
Pillar Drill Machine 19mm
Delivery is one essential factor which we have to consider at the time of purchasing the machine.
The customer always wants fast and safe delivery of their machine. but it is not possible in all cases.
We all know the transportation structure of India. Sometimes because of some problems, customers do not receive machines in safe conditions as well as not in fast. Sometimes we have to face the labor problem so, that can also delay the normal schedule of delivery.
Generally, the customer is so much far from the supplier’s location. They do not know the transporter’s nature and their work. So Customers should prefer responsibility towards the supplier’s side.
Why people prefer delivery by us?
- We have a good association here in Rajkot for region-wise transportation.
- We are dealing with transporters in a routine so we know very well about their nature, cost, performance, etc.
- Road transport is unstructured in India.
- You may be not that much aware of genuine and proper transport.
- If we suggest the transporter and machine will damage at the time of delivery then we are responsible for placing a claim against the transporter.
- All the responsibility belongs to Banka, we will repair the machine or replace the same. It will save time.
- One important part is ‘how to sling the machine’. Our genuine transporter knew to have to sling the machine safely.
We are here to Help you
1) What will be the warranty Period of this Drill Machine?
A: 1) All Gear Auto feed Radial Drill Machine
2) Back Geared Fine feed Radial Drill Machine
3) Back Geared Auto feed Radial Drill Machine
4) All geared Fine Feed Radial Drill Machine
5) Back Geared Fine Feed Pillar Drill Machine
2) How many types are there in the Drill Machine?
A: 1) All Gear Auto feed Radial Drill Machine
2) Back Geared Fine feed Radial Drill Machine
3) Back Geared Auto feed Radial Drill Machine
4) All geared Fine Feed Radial Drill Machine
5) Back Geared Fine Feed Pillar Drill Machine
3) How many popular models are there in the Drill Machine?
A : 40 mm Cap. All geared Auto feed Radial Drill Machine
40 mm Cap. All geared Fine feed Radial Drill Machine
40 mm Cap. Back geared Fine Feed Radial Drill Machine
40 mm Cap. All geared Auto feed Pillar Drill Machine
40 mm Cap. Back geared Auto feed Radial Drill Machine
38 mm Cap. All geared Auto feed Radial Drill Machine
38 mm Cap. All geared auto feed Pillar Drill Machine
38 mm Cap. Back geared Fine feed Pillar Drill Machine
25 mm Cap. Back Geared Fine Feed Radial Drill Machine
25 mm Cap. Back Geared Fine Feed Pillar Drill machine
20 mm Cap. Back geared Pillar drill Machine
4) Which are the accessories I Should Buy with Drill Machine?
A : Key Less Dill Chuck
Electrical Motors
Keyless Drill Chuck & Arbor
Drill Chuck & Arbor
Coolant Pump with Coolant Tank
Multi Spindle Drilling
Tapping Attachment
5) What are the confusions raised in the mind of customer at the time of purchasing Drill Machine ?
A: 1) Drilling Capacity requirement
2) Which type of drill is required?
6) Do you accept Domestic LC ?
A: Yes, accept domestic LC for 60 days on credit. Generally our 75 % customers are purchasing Machine from us with 60 days Credit through a Simple Process of LC. When the Seller is Unknown or New to the Buyer, Letter of Credit is one good Alternative to do the Business with Such New Seller Because Buyer can Avoid Risk by such Letter. Letter of Credit is one Additional Benefit to the Buyer by which they can protect Loss against Goods and Finance Also.The buyer can build safeguards into the letter of credit, including inspection of the goods and quality control, and set production and delivery times.
Related products
DCM 40 MM – DRILLING CUM MILLING MACHINE – BANKA 40MM AUTO FEED
RADIAL DRILL 40 MM HEAVY DUTY MACHINE – 3 YEAR WARRANTY, ALL GEAR DRILL – 1.5 INCH & 2050 RPM – RADIAL TYPE
DCM 40 MM – DRILLING CUM MILLING MACHINE – BANKA 40MM AUTO FEED
RADIAL DRILL 40 MM HEAVY DUTY MACHINE – 3 YEAR WARRANTY, ALL GEAR DRILL – 1.5 INCH & 2050 RPM – RADIAL TYPE
DCM 40 MM – DRILLING CUM MILLING MACHINE – BANKA 40MM AUTO FEED
RADIAL DRILL 40 MM HEAVY DUTY MACHINE – 3 YEAR WARRANTY, ALL GEAR DRILL – 1.5 INCH & 2050 RPM – RADIAL TYPE
Fast & Free Shipping Over $200
Two-day delivery on selected products
Expert Customer Service
8:00 - 20:00, 7 days/week
Free Gift Wrapping
With your custom message